 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
LoaDISC™
The LoaDISC™ changes bolting from the way you know it, to the way you like it.
Placing the LoaDISC™ underneath a regular nut turns regular nuts into cost efficient
speed fasteners, bolted connections into reliable and leak-free joints, bolting hazard into
safety, tool failure into reliability.
The cost effective LoaDISC™ converts torque applied to a nut into torsion free axial bolt
elongation.
A regular Nut becomes a Tension Nut! An inner thread segment stops the bolt from
turning with the nut! The bolt elongates, the segment is pulled along!
Put the economical LoaDISC™ on all joints. Lock on tools load up bolts hands-free,
torsion free with pure stretch.
The LoaDISC™ has three purposes:
The Result:
Torque is torsion-, side load- and joint rotation-free without reaction arms and backup
wrenches.
Bolt Stretching is free of unknown transfer relaxation. No overstretch. No slamming the
nut face on to the joint face during load transfer. No risk of inadvertent yield stretching
during loosening. With the known bearing face friction of the nut, Torque becomes more
predictable and even.
Major advantages are Hands-Free, Precision, Speed Torquing of all Bolts in Seconds,
Without the Hassle of:
• reaction arms, backup wrenches
• pullers, bridges, tommy bars
• jackscrews, impact-and hand wrenches
Without the Danger of:
• pinching fingers
• being close to high powered tools
Without the Nuisance of:
• torsion, side load, over-stretching, over-relaxing
• tool holding
• manual screw- or nut-turning
Without the Cost of:
• two sets of tooling, for torque and tension
• longer bolts
• tons of accessories
• tool repair due to internal torsions
The LoaDISC™ changes bolting from the way you know it, to the way you like it.
Placing the LoaDISC™ underneath a regular nut turns regular nuts into cost efficient
speed fasteners, bolted connections into reliable and leak-free joints, bolting hazard into
safety, tool failure into reliability.
The cost effective LoaDISC™ converts torque applied to a nut into torsion free axial bolt
elongation.
A regular Nut becomes a Tension Nut! An inner thread segment stops the bolt from
turning with the nut! The bolt elongates, the segment is pulled along!
Put the economical LoaDISC™ on all joints. Lock on tools load up bolts hands-free,
torsion free with pure stretch.
The LoaDISC™ has three purposes:
- Stop the bolt from turning and twisting while the nut is being turned
- Allow locking of the tool onto the LoaDISC™ for hands-free and upside down
operation - Make torque faster and more precise
The Result:
Torque is torsion-, side load- and joint rotation-free without reaction arms and backup
wrenches.
Bolt Stretching is free of unknown transfer relaxation. No overstretch. No slamming the
nut face on to the joint face during load transfer. No risk of inadvertent yield stretching
during loosening. With the known bearing face friction of the nut, Torque becomes more
predictable and even.
Major advantages are Hands-Free, Precision, Speed Torquing of all Bolts in Seconds,
Without the Hassle of:
• reaction arms, backup wrenches
• pullers, bridges, tommy bars
• jackscrews, impact-and hand wrenches
Without the Danger of:
• pinching fingers
• being close to high powered tools
Without the Nuisance of:
• torsion, side load, over-stretching, over-relaxing
• tool holding
• manual screw- or nut-turning
Without the Cost of:
• two sets of tooling, for torque and tension
• longer bolts
• tons of accessories
• tool repair due to internal torsions
| Optimizing Your Bolting Applications |
| LoaDISC™ installed on bolt |
| Standard nut on LoaDISC™ |
| While stretching the bolt, the inner thread segment of the LoaDISC™ raises to create a counter nut effect |
| Completed application with the LoaDISC™ |
| All Rights Reserved © 2008 JETYD of Alabama |